Fulcrum Racing Zero Nite Clincher
Fulcrum Racing Zero Nite Clincher
$ 1,400.99 1,400.99
About Fulcrum Racing Zero Nite Clincher
The Fulcrum Racing Zero Nite Clincher is trusted by racers due to its superior braking and performance characteristics - in a reliable aluminium package.
A completely new technology combines a very engaging total black look with high range specs, including a special braking surface that creates new standards for braking on aluminum road bike wheels.
The Plasma Electrolytic Oxidation process gives the braking surface very special characteristics regarding hardness and wear resistance.
This is possible thanks to a very fine and compact matrix of alpha and microcrystalline gamma alumina and amorphous alumina embedded on the surface. Thanks to the high hardness of the layer, this new wheel presents excellent wear resistance.
Fulcrum R&D department has developed a new design for Racing Zero Nite’s braking surface. The design created by turning allows superior braking efficiency. Specific blue brake pads should be used with this new model.
Dynamic Balance - For top models, this is obtained by a special operation on the section of the rim opposite the rim joint.
For entry-level models, Dynamic Balance is obtained by using two oversized spokes in the section opposite the joint. The result is a wheel with perfectly balanced rotational dynamics.
USB Ceramic Ultra Smooth Bearings - Fulcrum has a long-standing reputation for the extremely high performance of its hubs in terms of smoothness and reliability.
In fact, all the projects are entirely developed in our R&D department and we have put obsessive care into taking care of every detail.
The hubs with USB ceramic bearings (Ultra Smooth Bearings) further enhance the triathlon and road bike wheels’ smoothness and reduce weight and the need for maintenance.
2:1 Two-to-One - When you push on the pedals, the rotational force on the sprocket induces a slackening of the freewheel spokes with a consequent loss of rim tension.
This results in undesirable flex of the whole wheel and an unavoidable loss of energy. Fulcrum has solved this classic cycling problem with its 2:1 Two-to-One Spoke Ratio patent, by doubling the spokes in the critical zones.
MOMAG - A magnet and lots of ingenuity. This was what led to the patent for the well-tested “Mounting Magnet” system, or MoMag.
Anti-Rotation System - This new system raises the concept of spoking to a new level of performance for road bike and triathlon wheels.
The Fulcrum engineers have redesigned the spokes and the hub housings to create a solid and unmoveable whole. The result is that the spokes
a) will never lose their initial tension, thus keeping the wheel perfectly reactive and centred
b) will remain in the position that have been studied in the wind tunnel tests to ensure the best aerodynamic penetration possible.
F.I.C. Fulcrum Identification Card - 100% Handmade Quality
Traceability - A guarantee of quality
The keyword for our products is: traceable.
If you find a little label attached to any Fulcrum® product, do not remove it. It will provide you a guarantee in case of an ascertained defectiveness of a production batch, and so the component needed or wheel will be traceable.
All this because, devoted to its mission, Fulcrum demands the absolute perfection and safety for its customers.
Plasma Electrolytic Oxidation - The Plasma Electrolytic Oxidation treatment is a process made through electrical discharges that take advantage of heavy materials and free electrolytes.
This process is an advanced oxidation process of light alloys of aluminum, magnesium and titanium. This special project was developed a few decades ago in the Russian laboratories to improve characteristics of the lightweight materials used in the space and military spaces
The Plasma Electrolytic Oxidation process gives the alloy surface very special characteristics regarding hardness and wear resistance.
Rims - Triple Milling: this special triple milling makes it possible to reduce the peripheral weight of these road bike rims and to increase the reactivity of the wheels.
Differentiated rim height: 26mm at the front to have a good handling; 30mm at the rear to transfer all the power to the wheel.
Hub - Oversize aluminum flange and Two-to-One technology: the doubling of the spokes on the cassette side provides greater torsional stiffness and therefore a greater reactivity at each pedal stroke. This means greater efficiency in the transmission of power to these type of road bike wheels.
The front hub has been redesigned, now it is smaller and lighter than before, smoothness will be ensured by the well known USB™ bearing technology.
The cap and cone technology maintains the most efficient angle of contact between the bearings and bearing seat, increasing the smoothness and durability.
Spokes and nipples - Aluminum spokes and aluminum nipples: thanks to the light weight they reduce the peripheral mass, enemy of reactivity.
Tyre Type: Clincher
Tyre Size: 28"
Rim Material: Aluminium
Rim Material Details: Aluminium (6082, T6 Pre-Aging), triple milling, Plasma Electrolytic Oxidation treatment, Square Milling
Rim Height Category: Low
Rim Height: 27 mm (front)/ 30 mm (rear)
Rim Width: 22,5, ETRTO 17C
Tyre Width (Suggested): From 25 mm to 32 mm
Braking System: Caliper
Braking Surface/Braking Options: Aluminum braking surface, Plasma Electrolytic Oxidation treatment, milled
Front Axle Compatibility: QR
Rear Axle Compatibility: QR
Front Wheel Spokes: 16
Rear Wheel Spokes: 21 (Left 7 - Right 14), Two to one
Spokes Material: Aluminum
Spokes Profile Technology: Aero, straight pull
Front Hub: Carbon , Aluminum flanges
Rear Hub: Aluminum , Aluminum flanges
Bearing: USB ceramic bearings. Adjustable Cup & Conesbearing system
Others: Plasma treated HG freewheel. Aluminum Axle
More About The Manufacturer Fulcrum
Fulcrum Wheels s.r.l. designs wheels and components for racing bikes and distributes them in over 30 countries worldwide. They were based on the idea of three aerospace engineers who are passionate about bicycles. The strong points of this young company include the use of unique patents, ongoing technological research, and the attractive and young-spirited design.
Our goal is to offer you the best shipping options, no matter where you live. Every day, we deliver to hundreds of customers across the world, ensuring that we provide the very highest levels of responsiveness to you at all times.
The time frame for order delivery is divided into two parts:
- Processing time: Order verification, tailoring, quality check and packaging. All orders are sent for dispatch same day or next day.
- Shipping time: This refers to the time it takes for items to be shipped from our warehouse to the destination.
- Australia Orders Take 3-4 business days to arrive.
- Our Couriers work weekends, Thursday / Friday orders normal arrive Monday / Tuesday
- UK & Europe Orders are dispatched using Fedex or DHL and Take 3-5 days to arrive.
WARRANTY - All new devices come with our comprehensive 12 month warranty, which is included in the standard purchase price. We'll even replace with a new item if yours can't be repaired. Refurbished items (marked as such in the product description) come with a 3 month warranty.
ENQUIRY & TROUBLESHOOTINGWe will reply to your emails promptly. email email@example.com
ITEM RETURNIf necessary, your item will need to be returned to our office in Sydney.
TECHNICAL ASSESSMENTYour item will be assessed by our technicians or sent to the manufacturer
REPAIR OR REPLACEMENTOur specialist technical team will repair your product or replace the product if necessary.
RETURN DELIVERYWe will deliver the product back to you.
Please Note: While the return process may take up to 15 days, excluding transit times, we endeavour to complete returns as quickly as possible, and many are resolved within the week. Return delivery times are estimates only and may vary based on location.